Suggested Price:
Price: $59.95
| BCT-10 Suggested Price: Price: $59.95
|
"The World's Smallest Mobile Scanning System from Uniden Bearcat."
Coverage: 29-54, 108-174, 406-512
Factory Serviced 30 day factory warranty
Highway Patrol alert with strength meter
Highway patrol coverage
Local police coverage
Pre-programmed scanner covers all 50 states plus Canada
9 level strength meter
Instant weather
Built-in speaker
External speaker jack
Channel lockout
Memory backup
Hold Key
Windshield mountable
The BearTracker is a sophisticated highway alarm system that responds to radio waves emitted from special secondary transmitters installed on most highway patrol vehicles across the U.S. The BCT-10 alarm system informs you both visually and audibly when activity is detected. It also determines signal strength to inform you of the presence and distance of highway patrol vehicles even if they're not using radar!
Features
2 Digit/State LED Display with Pre-Programmed Frequencies - The BCT-10 comes equipped with 866 pre-programmed frequencies which includes all 50 states and Canadian provinces. Just set the BCT-10 for your state and go, the scanner does the rest.
LED Numerical Signal Strength Meter - This lighting fast technology gives you an accurate indication of strength and distance of radio transmissions.
Multiple Coverage - Helps protect you against all forms of speed measurement including Radar, VASCAR, Airplane, Clocking and Laser.
Instant Weather - Automatically scans all NOAA weather channels and two Canadian Coast Guard channels.
Channel Lockout - This feature allows you to skip channels you don't want to hear.
High Gain 360 Rubber Antenna - The BCT-10 uses a highly sensitive antenna to receive radio signals. Adjustable for any mounting situation.
Built-in Speaker - Allows you to monitor law enforcement two-way radio transmissions.
External Speaker Jack - An external speaker jack allow you to add-on a external speaker.
Built-in Scan Delay - An automatic 2 second delay that allows time for reply on the same channel before resuming to scan.
Mute - While warning alarm is sounding, press mute to mute the warning alarms for the duration of warning (until warning LED turns off.) The mute is automatically reset when warning LED turns off.
Memory Backup - The BCT-10 comes with a permamant memory back-up system that remembers your state selection, frequency selections and deletions when you power off the unit.
Hold Key - When the scanning stops on an active frequency, press this key to stay on that frequency. The warning function is disabled in the hold mode. Press this key again to go back to scanning.
Accessories - The BCT-10 includes a "Quick-Clip Release" dual suction windshield mount, visor mounting bracket, cigarette lighter adaptor plug, hard-wired power cord and DC power cord.